JAN code : 4974425813292
Calibration : Available
JCSS Accredited Calibration : Available
SK-130ITH is a thermohygrometer and an infrared thermometer combined in one body. Thermohygrometer measures ambient air and calculates
dew point while the infrared thermometer measures the object.
The device puts these values into calculation to forecast the dew point of the object.
■ Thermohygrometer and infrared thermometer can be separately used. The thermohygrometer section measures air temperature, humidity
, wet bulb temperature,
and dew point while the infrared thermometer part measures surface temperature.
■ Difference between the dew point and the surface temperature can be displayed in addition to the dew point itself.
■ Emissivity is adjustable from 0.30 to 0.99. A laser marker helps you specify the measuring spot at a glance.
■ LCD backlight improves readability in a dark place. Also, the power turns off automatically when not in use to prevent from running
out the battery even when you forget to turn it off.
■ Caution! This device is for industrial use, not for clinical use.
■ Measured area depends on distance from the object as shown below. Distance-to-spot ratio is roughly 6:1.
■ For the better measurement
A square and a circle represent the object and the measured area respectively.
 |
 |
 |
| Best | Get close if possible. | Temperature of other than the object is measured. Get close. |
■ JCSS-accredited calibration is only available for air temperature and humidity. (JCSS is an official authority acquired ILAC MRA)
| Cat. No. | 8132-00 | |
| Product name | Condensation Checker with Infrared Thermometer | |
| Model name | SK-130ITH | |
| Measuring range | Temperature | 0.0 to 50.0°C |
| Humidity | 10.0 to 95.0%rh | |
| Surface temp. | −20.0 to 105°C | |
| Dew point, wet bulb temp. | Calculated within the above ranges | |
| Accuracy | Temperature | ±0.6°C |
| Humidity | ±3%rh (20 to 90%rh, 20 to 30°C) ±5%rh (other) |
|
| Surface temp. | ±2.0°C (ambient 23±5°C, emissivity 0.95) | |
| Resolution | Temperature | 0.1°C |
| Humidity | 0.1%rh | |
| Surface temp. | 0.1°C | |
| Sampling time | Temperature, humidity | 1 second |
| Surface temp. | 0.5 seconds | |
| Detector | Temperature | Termistor |
| Humidity | Capacitive humidity sensor | |
| Surface temp. | Thermopile (measured wavelength: 8–14 μm) | |
| Emissivity | Adjustable between 0.30 and 0.99 in steps of 0.01 | |
| Distance coefficient | D:S = 6:1 (where D is distance, S is diameter of spot circle) | |
| Laser marker | Source wavelength: 650 nm Output: Less than 1 mW Certified for PSC, a standard based on Japan's Consumer Product Safety Act, as a class II portable laser device. |
|
| Operation ambient | 0 to 50°C, less than 90%rh without condensing | |
| Power | AAA alkaline battery x4 | |
| Battery life | Approx. 20 hours if both laser and backlight are on; 30 hours if only laser is on; 90 hours if both laser and backlight are off (when both the thermohygrometer and infrared thermometer are activated in room temperature) |
|
| Material | ABS resin | |
| Dimensions | 70 (W) x 170 (H) x 49 (D) mm | |
| Weight | 235 g including batteries | |
| Standard accessories | AAA alkaline battery x4 | |
‘
‘
‘
Hubungi:
PT Bopana Arga Prima Jaya
Jalan Jupiter VI Perum Bintang Metropol
Blok A7 No.16 Bekasi Utara 17122
Jawa Barat, Indonesia
Telp : 021-22163350
Hp : 08119762505 / 081285345374
Email : boney@bapj.co.id / tesa@bapj.co.id
