The Xsafe can easily be connected to existing measuring and warning devices via a 3-wire 4 ... 20 mA or mV output. The gas detector also impresses with its simple installation and maintenance, as well as its robust housing made of aluminum, which is IP65 protected.
| Sensor type | pellistor |
| Housing | aluminium |
| Detectable gases (depending on the version) | 0...100 % LEL methane 0...100 % LEL propane |
| Response time | T90 <15s (type) |
| Protection class | IP 65 |
| Signal output | mA version: 3-wire 4 ... 20 mA output mV version: 3-wire mV bridge (typical signal: 12-15 mV /% LEL CH4) |
| Cable input | M20 |
| Approval | not certified for use in a hazardous environment |
| EMC compliance | EN 50270 FCC part 15 ICES-003 |
| Operating voltage | 8...30 V DC (mA version) 2.0 V DC (mV version) |
| Power consumption | mA version: 50 mA max. @ 24 V DC 1.2 W mV version: 300 mA (typ.) |
| Temperature range | -40 ... +80 °C / -40 ... +176 °F (mV version) -40 ... +55 °C / -40 ... +131 °F (mA version) |
| Humidity | 0 ... 99 % RH, non-condensing |
| Dimensions | 156 x 166 x 111 mm / 6.14 x 6.53 x 4.37" |
| Weight | 1 kg / 2.2 lb |
