The XRD-Mill McCrone was specially developed for the preparation of samples for subsequent X-ray diffraction (XRD). The mill is used for applications in geology, chemistry, mineralogy and materials science, quality control as well as R&D.
Because of its unique grinding motion, the XRD-Mill McCrone is particularly effective for this analytical method: The 48 cylindrical grinding elements grind the samples gently via friction. The result is a short grinding time with almost no sample loss and an exceptionally narrow particle size distribution. Consequently, the signals in the X-ray diffraction pattern are peak-shaped, with small half-widths, allowing for very good phase analysis.
The crystal lattice structure is largely preserved, with almost no defects, a prerequisite for meaningful X-ray diffraction patterns.
The grinding vessel consists of a 125 ml capacity polypropylene jar fitted with a screw capped gasketless polyethylene closure. The jar is filled with an ordered array of 48 identical cylindrical grinding elements, available in agate, zirconium oxide or corundum. The grinding time for optimum micronization is between 3 and 30 minutes. A typical sample volume is between 2 and 4 ml.
For the preparation of organic samples for a subsequent XRD examination we also offer a hand mortar and pestle made of agate.
bones, borides, carbides, cement, ceramics, clay, construction materials, glass, metals, mica, minerals, nitrides, plant materials, slate
To find the best solution for your sample preparation task, visit our application database.
| Applications | grinding, mixing and triturating, dry and wet |
| Field of application | X-ray diffraction |
| Feed material | medium-hard, hard, brittle, fibrous |
| Material feed size* | < 0.5 mm |
| Final fineness* | < 1 µm |
| Speed at 50 Hz (60 Hz) | 1,000 - 1,500 min-1 in 4 steps |
| No. of grinding stations | 1 |
| Typical mean grinding time | 3 - 30 min |
| Dry grinding | yes |
| Wet grinding | yes |
| Cryogenic grinding | no |
| Material of grinding tools | agate, zirconium oxide, corundum |
| Grinding jar sizes | 125 ml |
| Setting of grinding time | digital, 00:00:10 to 99:59:50 |
| Drive | DC-Motor |
| Drive power | 50 W |
| Electrical supply data | 100-240 V, 50/60 Hz |
| Power connection | 1-phase |
| Protection code | IP 30 |
| Power consumption | 33 VA |
| W x H x D closed | 205 x 155 x 520 mm |
| Net weight | ~8.9 kg |
| Standards | CE |
*depending on feed material and instrument configuration/settings
The XRD-Mill McCrone carries out size reduction mainly by friction. 48 cylindrical grinding elements are placed into the grinding jar in eight rows of six elements each.
During operation, the jar’s circular motion causes the elements to grind the sample from < 0.5 mm to the low μm-range (typically < 10 μm).
Thanks to the very gentle size reduction process, the crystal lattice of the sample is preserved. This makes the XRD-Mill McCrone the instrument of choice for the sample preparation for subsequent X-ray diffraction analysis.
Content may be subject to modifications or corrections
