JAN code : 4974425200085
Calibration : Available
JCSS Accredited Calibration : Not available
BM-T-75P is a bimetallic dial thermometer which its sensing stem extended behind the dial. Adopted polyamide resin for a case, and brass for a sensor and screw, the best cost reduction is achieved without worsening quality. You can choose your preferred one from 9 variants made up of 3 temperature ranges and 3 different length of sensing stems. Those of 0 to 200°C are made to order. This page shows the one of 0 to 150°C, stem length 100 mm.
■ Notice:
Order a temperature range which covers your target temperature with a safe margin. For example, order 0 to 150°C if the temperature is expected to be up to 100°C.
Order a protector pipe in addition in the following cases:
- The sensing stem receives pressure more than 2 kgf/cm2
- A target object is corrosive; however, there is a probability that the protector pipe made of stainless steel can not prevent corrosion, thus ask us for details.
Ask us for details about make-to-order products, or if this product is located in a vibrating place.
■ Drawing
| Cat. No. | 2093-00 |
| Product name | Bimetal Thermometer, 0 to 150°C, 100 mm Stem |
| Model name | BM-T-75P |
| Measuring range | 0 to 150°C |
| Accuracy | ±2°C |
| Minimum scale | 2°C |
| Materials | Dial case: Polyamide resin Sensing stem, screw: Brass Window: Glass |
| Dimensions | Dial case/window: 87 mm/75 mm diameter Sensing stem: 8 mm dia. x 100 mm (L) |
| Screw | 1/2" PT, strength 2 kgf/cm2 |
‘
‘
‘
Hubungi:
PT Bopana Arga Prima Jaya
Jalan Jupiter VI Perum Bintang Metropol
Blok A7 No.16 Bekasi Utara 17122
Jawa Barat, Indonesia
Telp : 021-22163350
Hp : 08119762505 / 081285345374
Email : boney@bapj.co.id / tesa@bapj.co.id
