Deskripsi produk

Spec

• Validated products are Azuwan original services that conduct FAT (Factory Acceptance Test) at Azuwan before shipping.
• Validate (FAT) before shipping.
• After receiving the order, a FAT instruction form (plan) is sent to the user, and after the signature is returned, the FAT is performed.
• Appendix: FAT report/Calibration Certificate of used measuring instrument copied
• *I am attaching Azwan's original FAT instruction manual (see the sample at the bottom left of the Screen).
• Temperature point: 10 degrees C 3 points, liquid pressure gauge and flow meter required
• Circulation system: closed system countercirculation
• Performance
• External circulation capacity (50/60 Hz): maximum flow rate 40.7/44.6 L/min, maximum head 13.6/19.1 m (* Performance of the pump alone/at room temperature of 20 degrees C, 50 Hz and no load.)
• Cooling capacity: 1500 W at 20 degrees Celsius (room temperature: 20 degrees Celsius)
• Function
• Temperature setting and display: Sheet key input and digital display
• Safety features: Ground fault breaker, Refrigerator Overload, High pressure switch, Circulation pump Overcurrent protection, Water level warning
• External input/output: external alarm output terminal, external operation output terminal, remote control terminal, external alarm input terminal
• component equipment
• Refrigerator: 600 W
• Refrigerant: R 407 C
• External circulation connection port: discharge port/return port both, diameter Rc 3/4
• Liquid tank: about 16 L stainless steel
• Electrical properties
• Power supply: 100 VAC 50/60 Hz
• Power cord length: 2 m (3P plug + adapter)
• Maximum operating current: 9 A
• External dimensions: 360 x 460 x 1020 mm
• Weight: 60 kg
• Temperature control range (deg. C): 10 ~ 30
• *Exterior material SUS 430 [No. 4] specifications can also be manufactured. Please inquire.
• Local validation services (IQ/OQ) are also available.　Please contact us.
• *The on-site validation service is a service that performs installation qualification (IQ) and operational performance qualification (OQ) at the installation site and submits an inspection form.
• *If you would like to request a local IQOQ, please contact us separately. We will need your installation address for the estimate.

‘
‘
‘
Hubungi:
PT Bopana Arga Prima Jaya
Jalan Jupiter VI Perum Bintang Metropol
Blok A7 No.16 Bekasi Utara 17122
Jawa Barat, Indonesia
Telp : 021-22163350
Hp : 08119762505 / 081285345374
Email : boney@bapj.co.id / tesa@bapj.co.id