| Order No. |
1-7473-41-28 |
| Model No. |
EI-300V |
| JAN Code |
4589638434785 |
Spec
- Validated products are Azuwan original services that conduct FAT (Factory Acceptance Test) at Azuwan before shipping.
- Validate (FAT) before shipping.
- After receiving the order, a FAT instruction form (plan) is sent to the user, and after the signature is returned, the FAT is performed.
- Appendix: FAT report/Calibration Certificate of used measuring instrument copied
- *I am attaching Azwan's original FAT instruction manual (see the sample at the bottom left of the Screen).
- Temperature points: 9 points at 37 degrees Celsius
- Storage capacity (L): 27
- External dimensions (mm): 400 x 410 x 685
- Interior dimensions (mm): 300 x 300 x 300
- Convection system: Natural convection air jacket
- Temperature control range: room temperature + 5 ~ 80 degrees C
- Time to reach 37 degrees: About 20 minutes
- Temperature distribution (JTM K05): +/- 0.6 degrees C (at 37 degrees C)
- Temperature variation (JIS): +/- 0.6 degrees C (at 37 degrees C)
- Temperature Gradient (JIS): 2.0 degrees C (at 37 degrees C)
- Temperature control system: PID control, SSR output
- Additional functions: ON Timer, OFF Timer, SV start, ON/OFF Timer
- Safety device
- Independent overtemperature protection device (operating temperature can be set digitally)
- Overcurrent breaker
- Burnout mechanism (heater OFF when sensor is disconnected)
- Heater capacity: 200 W
- Temperature Sensor: Platinum temperature resistor Pt 100 ohm
- Overrise prevention sensor: K thermocouple
- Shelf Pitch/Number of Racks: 35 mm Pitch/7 Racks
- Exterior/Interior: Steel powder coating/Stainless steel (SUS 304)
- Inner door material: Tempered glass
- Vent: 32 mm in diameter x 1
- Weight: approximately 30 kg
- Power Supply: 100 VAC 50/60 Hz Cord Length 2 m 3 P Plug
- Shelf load capacity: 15 kg
- Accessories: 2 shelf boards, 2 shelf rails
- Local validation services (IQ/OQ) are also available. Please contact us.
- *The on-site validation service is a service that performs installation qualification (IQ) and operational performance qualification (OQ) at the installation site and submits an inspection form.
- *If you would like to request a local IQOQ, please contact us separately. We need your installation address for the estimate.
‘
‘
‘
Hubungi:
PT Bopana Arga Prima Jaya
Jalan Jupiter VI Perum Bintang Metropol
Blok A7 No.16 Bekasi Utara 17122
Jawa Barat, Indonesia
Telp : 021-22163350
Hp : 08119762505 / 081285345374
Email : boney@bapj.co.id / tesa@bapj.co.id
