Heating is possible while replacing with inert gas such as nitrogen gas.
It can be used for material (metal and inorganic compounds) testing, heat treatment, etc.
Built-in cooling fan reduces body surface temperature during high temperature operation.
You can set up to 8 patterns of 16 step programs, plus the temperature rise rate.
Equipped with a completely independent excessive rise prevention device, this is a reassuring design that cuts off the power to the heater when the door is opened.
It also has a burnout function to detect sensor abnormalities.
Heating in an inert gas atmosphere is possible!
Spec
External dimensions (mm): 485 x 550 x 685
Inner furnace dimensions (mm): 260 x 275 x 260
Number of pieces: 1
Maximum temperature (normal/nitrogen gas replacement): 1250 degrees C/about 1000 degrees C
Heating time (from room temperature to maximum temperature): About 90 minutes (in an empty furnace)
Sensor/control method: R thermocouple/PID control
Independent excessive rise prevention function: Heater output OFF at any set temperature (digital setting type)
Program functions: 16 steps and 8 patterns
Time setting range: 0 minutes to 99 hours 59 minutes (time setting resolution: 1 minute)
Accessories: Mullite Shelf (220 x 220 x 8) x 2, Dice Post (20 x 30 x 40) x 3, L Post (L = 90) x 3, Exhaust Outlet Plug x 1, Ground Wire x 1, Gas Replacement Valve
*To use while maintaining an inert atmosphere, be sure to keep a small amount of gas flowing.
*The furnace interior dimensions include the sensor projections.
*Please check AXEL for accessories.
‘
‘
‘ Hubungi:
PT Bopana Arga Prima Jaya
Jalan Jupiter VI Perum Bintang Metropol
Blok A7 No.16 Bekasi Utara 17122
Jawa Barat, Indonesia
Telp : 021-22163350
Hp : 08119762505 / 081285345374
Email : boney@bapj.co.id /tesa@bapj.co.id
