Simply Connect to a Tester or Recorder to Easily Measure Large Currents
Hioki current sensors are best-in-class devices for accurately capturing a wide range of current levels. The 9132-50 is a multi-range 1000 A AC voltage output clamp sensor for capturing waveforms with DMMs and Memory HiCorders. Measure AC current on live power lines without needing to cut the wire.
CAT III 600 V
| 9132-50 | BNC output terminal |
|---|
| Rated current | 20 A to 1000 A AC, 6 ranges | |||||
|---|---|---|---|---|---|---|
| Accuracy | ±3 % rdg. ±0.2 % f.s. (45 to 66 Hz) | |||||
| Frequency characteristics | Add to amplitude accuracy for frequencies from 40 to 1 kHz: ± 1 % rdg. | |||||
| Output rate | 0.2 V AC f.s. (f.s. = setting rage) (Connect to a voltage input device providing a high input impedance of 1 MΩ) |
|||||
| Max. allowable input | 1000 A rms continuous (all ranges) (For 40 Hz to 500 Hz: 100 %, and for 500 Hz to 1 kHz: within 90 % of derating) |
|||||
| Max. rated voltage to earth | 600 Vrms (50/60 Hz, CAT III) | |||||
| Core diameter | φ55 mm (2.17 in), or 20 mm (0.79 in) × 80 mm (3.15 in) busbar | |||||
| Dimensions and mass | 100 mm (3.94 in)W × 224 mm (8.82 in)H × 35 mm (1.38 in)D, 600 g (21.2 oz), cord length: 3 m (9.84 ft) | |||||
| Included accessories | Instruction manual ×1 | |||||
