Simply Connect to a Tester or Recorder to Easily Measure Large Currents
Hioki current sensors are best-in-class devices for accurately capturing a wide range of current levels. The 9010-50 is a multi-range 500A AC voltage output clamp sensor for capturing waveforms with DMMs. Measure AC current on live power lines without needing to cut the wire.
CAT III 600 V
| 9010-50 | BNC output terminal |
|---|
| Rated current | 10 A to 500 A AC, 6 ranges | |||||
|---|---|---|---|---|---|---|
| Accuracy | ±2 % rdg. ±1 % f.s. (45 to 66 Hz) | |||||
| Frequency characteristics | Add to amplitude accuracy for frequencies from 40 to 1 kHz: ± 6 % rdg. (at 10 A and 20 A range) ± 3 % rdg. (for 50 A range and above) |
|||||
| Output rate | 0.2 V AC f.s. (f.s. = setting rage) (Connect to a voltage input device providing a high input impedance of 1 MΩ) |
|||||
| Max. allowable input | 150 A rms continuous (10/20/50 A ranges) 400 A rms continuous (100/200 A ranges) 650 A rms continuous (500 A range) (For 40 Hz to 100 Hz: 100 %, and for 100 Hz to 1 kHz: within 50 % of derating) |
|||||
| Max. rated voltage to earth | 600 Vrms (50/60 Hz, CAT III) | |||||
| Core diameter | φ46 mm (1.81 in) | |||||
| Dimensions and mass | 78 mm (3.07 in)W × 188 mm (7.40 in)H × 35 mm (1.38 in)D, 420 g (14.8 oz), cord length: 3 m (9.84 ft) | |||||
| Included accessories | Instruction manual ×1 | |||||
