Amprobe LT-10 Lamp Tester

• Tests whether fluorescent lamps and light bulbs are operational prior to installation or removal
• Features built-in VolTect alert to verify voltage presence and eliminate the need to carry a separate voltage detector
• Offers single-handed, one-button operation for all lamp tests
• Provides a pin test to check the continuity of the bulb’s electrodes
• Features ultra-compact design for easy portability
• Includes a 48 removable, fully retractable antenna to test lights without climbing a ladder
• Emits visual and audible alerts for pin and voltage test functions
• Works with all fluorescent light bulbs: T2, T4, T5, T8, T9, T10, T12

Description

The Amprobe LT-10 Lamp Tester takes the guess work out of troubleshooting fluorescent light fixtures, saving you time and money. This 3-in-1 tool tests the light bulb, pins, and voltage so you can tell whether fluorescent light bulbs are working before you install or remove them. The intuitive one-button operation, 48″ removable and retractable antenna, VolTect™ non-contact voltage detection, and ultra-compact design, makes the LT-10 Lamp Tester the right tool for electrical and facilities maintenance applications.

Specifications

Specifications	Range
Compatible lamps	T2, T4, T5, T8, T9, T10, T12 and fluorescent energy saving light bulbs
Test voltage	Approximately 3 kV / 280 kHz
Field strength	Approximately 100 μV/m at 260 – 300 kHz
Maximum antenna length	48″
Filament test	T2, T4, T5, T8, T9, T10, T12
VolTect™ non-contact voltage detection	AC 90 V to AC 600 V, 50/60 Hz CAT II 300 V, CAT I 600 V
Non-contact voltage sensitivity with probe tip (typical)	LED illuminates and beeps at approx. 3 mm (0.12 in) distance from a wire carrying 120 Vac LED illuminates and beeps at approx. 5 mm (0.2 in) distance from a wire carrying 230 Vac
Drop proof	36″
Operating time	One second ON, one second OFF for maximum five cycles and wait for 1 minute before taking another measurement
Operating temperature	-10°C to +50°C (14°F to 122°F) ≤ 85% RH
Storage temperature	-10°C to +50°C (14°F to 122°F) ≤ 85% RH
Operating altitude	Up to 2000 meters
Battery	One 9V lithium or alkaline battery only, 6LR61/6LF22/MN1604 or equivalent.
Battery life	Up to 500 tests (Alkaline typically)
Dimensions (L x W x H)	Approximately 170 x 40 x 24 mm (6.69 x 1.57 x 0.94 in) without antenna
Weight	Approximately 80 g (0.18 lb) with battery installed, excluding 48″ antenna
Safety compliance	IEC 61010-1, UL 61010-1, CAN/CSA-C22.2 No. 61010-1-04
EMC compliance	IEC 61326-1
Certifications
Calibration	NA

What’s Included

• LT-10
• 48 antenna
• Adaptor plate
• Battery
• Carrying case

BOPANA ARGA PRIMA JAYA

Jl. Jupiter VI, Perum Bintang Metropol Blok A7 No.16, RT.004/RW.013, Perwira, Kec. Bekasi Utara, Kota Bks, Jawa Barat 17122

Phone                  :+62 -21-2216-3350  & +62-21- 292531-86

Whatsapp          : +62 812-8202-721 & +62 811-1871-501

Email                   : info@bapj.co.id || bopana.argaprima@gmail.com

Website              : www.bapj.co.id