Deskripsi produk

Spec

• Validated products are Azuwan original services that conduct FAT (Factory Acceptance Test) at Azuwan before shipping.
• Validate (FAT) before shipping.
• After receiving the order, a FAT instruction form (plan) is sent to the user, and after the signature is returned, the FAT is performed.
• Appendix: FAT report/Calibration Certificate of used measuring instrument copied
• *I am attaching Azwan's original FAT instruction manual (see the sample at the bottom left of the Screen).
• Temperature points: 3 points at 5 degrees Celsius
• External dimensions: 483 x 487 (554) x 690 mm * The sizes in () include projections.
• Internal dimensions: 400 x 335 x 370 mm
• Contents: 50 L
• Materials: Exterior/Resin Baked Coated Steel, Interior/Stainless Steel
• Temperature setting range: -15 to + 50 degrees C
• Compressor output: 85 W
• Refrigerant: R -134 a
• Refrigerator ON/OFF Control/+/- 1.5 degrees C (5.0 degrees C set, no load), Heater Proportional Control/+/- 0.5 degrees C (37.0 degrees C set, no load)
• Temperature distribution: +/- 2.0 degrees C (setting 5.0 degrees C, ambient temperature 30 degrees C, no load), +/- 0.5 degrees C (setting 37.0 degrees C, ambient temperature 20 degrees C, no load)
• Circulation method: Lower back (callout) to upper back (suction)
• Defrosting method: Heater defrost method (microcomputer control)
• Function: Program operation (8 steps, 2 patterns) continuous repetition (1 step 0 ~ 99 hours, memory backup about 48 hours)
• Alarm functions: door alarm, temperature anomaly, sensor anomaly, overrise prevention, earth leakage breaker
• Power supply: 100 VAC, 50/60 Hz
• Power cord length: 3 m
• Power plug: grounded 3P plug (L shape)
• Maximum power consumption (50/60 Hz): 270/275
• Weight: approximately 40 kg
• Number of shelf nets: 2
• Legs: Rubber legs
• This product is compatible with the Validation Service (IQ/OQ). Please contact us.
• *The on-site validation service is a service that performs installation qualification (IQ) and operational performance qualification (OQ) at the installation site and submits an inspection form.
• *Shipping, carrying-in, installation and assembly costs are required separately. Please inquire.
• *Since this product is a physical and chemical culture and refrigeration equipment, it may not be used for medical treatment or similar activities or purposes.
• *If you would like to request a local IQOQ, please contact us separately. We need your installation address for the estimate.

‘
‘
‘
Hubungi:
PT Bopana Arga Prima Jaya
Jalan Jupiter VI Perum Bintang Metropol
Blok A7 No.16 Bekasi Utara 17122
Jawa Barat, Indonesia
Telp : 021-22163350
Hp : 08119762505 / 081285345374
Email : boney@bapj.co.id / tesa@bapj.co.id