AEMC AC Current Probe Model MN253

Update Terakhir

AC Current Probe Model MN253

Negara Asal

AMERIKA

Pembelian minimum

1

Harga

Kategori

AEMC

Minta Penawaran

Sharing:

Deskripsi produk

AC Current Probe Model MN253

The MN253 is a general purpose AC current probe with voltage output. It is designed for use with DMMs or with measuring instruments with voltage inputs. These probes permit the measurement or recording of current with instruments without current ranges. The voltage output is proportional to the current measured (through the jaws). The MN253 offers a voltage output of 10mV per amp measured. The MN253 has integral 5 ft (1.5m) leads terminated by shrouded banana plugs.

Specifications :

Maximum Conductor Size	0.78" (20mm), bus bar 20x5mm
Current Range	200Arms AC
Measurement Range	0.1 to 240A
Output	5ft (1.5m) lead with 4mm safety banana plug
Transformation Ratio	N/A
Output Signal	10mV/A AC (2000mV @ 200A)
Accuracy 50/60Hz	1% ± 0.5A @ 200A
Frequency Range	40Hz to 10KHz
Phase Shift at 50Hz	2.5° @ 200A
Open Secondary Voltage	N/A
Load Impedance	1MΩ
Overload	240A for 10 min ON, 30 min OFF
Dimensions (H x W x D)	5.47 x 2.00 x 1.18” (139 x 51 x 30mm)
Weight With 24” (610mm) Sensor	6.3 oz (180g)
Operating Temperature	14° to +131°F (-10° to +55°C)
Storage Temperature	-40° to +158°F (-40° to +70°C)
Operating Humidity	90% RH
Pollution Degree	2
Ingress Protection (Ip)	IP40
EMC	EN 61326-1
Safety Compliance	EN/IEC 61010-1 600V CAT III, EN/IEC 61010-032