AEMC AC Current Probe Model MN261

Update Terakhir

AC Current Probe Model MN261

Negara Asal

AMERIKA

Pembelian minimum

1

Harga

Kategori

AEMC

Minta Penawaran

Sharing:

Deskripsi produk

AC Current Probe Model MN261

The MN261 is a high sensitivity probe with voltage outputs (100mV/A and 10mV/A) and combine two switch-selectable ranges of 20A and 200A, thus permitting accurate measurements at low and high levels. The MN261 is designed for oscilloscopes and other BNC terminated instruments. It has two performing ranges (20A, 200A) both voltage output (100mV/A and 10mV/A) and 40Hz to 10kHz response.

Specifications:

Maximum Conductor Size	0.78" (20mm), bus bar 20x5mm
Current Range	20A & 200Arms AC
Measurement Range	0.1 to 24A & 0.1 to 240A
Output	6ft (2m) lead with insulated BNC connector
Transformation Ratio	N/A
Output Signal	100mV/A (2V @ 20A), 10mV/A AC (2V @ 200A)
Accuracy 50/60Hz	2% ± 0.5A & 20A, 1.5% ± 0.5A @ 20A & 200A
Frequency Range	40Hz to 10KHz (-3dB)
Phase Shift At 50Hz	3° @ 200A
Open Secondary Voltage	N/A
Load Impedance	1MΩ & ≤ 100pF
Dimensions (H x W x D)	5.47 x 2.00 x 1.18” (139 x 51 x 30mm)
Weight With 24” (610mm) Sensor	6.3 oz (180g)
Operating Temperature	14° to +131°F (-10° to +55°C)
Overload	24A & 240A for 10 min ON, 30 min OFF
Storage Temperature	-40° to +158°F (-40° to +70°C)
Operating Humidity	90% RH
Pollution Degree	2
Ingress Protection (Ip)	IP40
EMC	EN 61326-1
Safety Compliance	EN/IEC 61010-1 600V CAT III, EN/IEC 61010-032