| Clamping Diameter | 2” (52mm) |
| Current Range | 1200AAC |
| Measurement Range | 1 to 1200AAC |
| Lead Length | 10 ft (3m) |
| Output Termination | Proprietary connector |
| Accuracy (Typical) | ±0.3% |
| Power Source | N/A |
| Compatibility | AEMC PowerPads and PELs |
| Operating Temperature | 14° to +131°F (-10° to +55°C); 10 to 85% RH |
| Storage Temperature | -40° to +158°F (-40° to +70°C); 10 to 90% RH |
| Dimensions | 8.5 x 4.4 x 1.8” (216 x 111 x 45mm) |
| Weight | 24 oz (690g) |
| Pollution Degree | 2 |
| Protection | IK 04, IP40 (jaws closed), IP30 (jaws open) |
| Safety Compliance | IEC 61010-1, IEC 61010-2-032, 1000V CAT III, 600V CAT IV |
AC Current Probe Model MN114
The MN114 is a general purpose mini probe which offers 1mA to 10AAC, continuous cycle current range. The output signal is 100mVAC/AAC (1V at 10A). It was designed to optimize measurements on 5A signals. The output termination is a 5ft lead with safety 4mm banana plug.
Specifications:
| Maximum Clamping Diameter | 0.47" (12mm) |
| Current Range | 10Arms AC |
| Measurement Range | 1mA to 10AAC |
| Output Signal | 100mVAC / AAC (1V @ 10A) |
| Transformation Ratio | N/A |
| Output | 5 ft (1.5m) lead with 4mm safety banana plug |
| Accuracy 50/60Hz | 2% R ± 2mA (typical) |
| Frequency Range | 30Hz to 5kHz |
| Phase Shift at 50/60Hz | <8° |
| Open Secondary Voltage | N/A |
| Load Impedance | 100kΩ min |
| Dimensions (HxWxD) | 1.26 x 4.5 x 0.87” (32 x 115 x 22mm) |
| Weight | 6 oz (160g) |
| Operating Temperature | -13° to +122°F (-25° to +55°C) |
| Storage Temperature | -40° to +176°F (-40° to +80°C) |
| Rating | UL 94 V0 |
| Safety | 250V working voltage, 30V max common mode between output and ground, 3kV 50/60Hz dielectric for 1mm. This probe is not CE marked. |
BOPANA ARGA PRIMA JAYA
Perum Griya Indah Serpong Blok F6 No.8, Gn. Sindur, Kec. Gn. Sindur, Bogor,
Jawa Barat 16340, Indonesia
Phone :+62 -21-2216-3350 & +62-21- 292531-86
Whatsapp : +62 812-8202-721 & +62 811-1871-501
Email : info@bapj.co.id || bopana.argaprima@gmail.com
