AEMC AC Current Probe Model SR651

Update Terakhir

AC Current Probe Model SR651

Negara Asal

AMERIKA

Pembelian minimum

1

Harga

Kategori

AEMC

Minta Penawaran

Sharing:

Deskripsi produk

AC Current Probe Model SR651

The SR651 is a general purpose 1000A_AC current probe designed for use with DMMs, loggers and other instruments that have voltage inputs. It has a voltage output proportional to the rate of 1mV per amp to the current measured in the jaw. The SR651 has jack output terminations that accept 4mm banana plugs. The rounded jaw design on this probe makes it well-suited for power applications where high accuracy and low phase shift are important.

Specifications:

Maximum Conductor Size	2.05" (52mm)
Current Range	1000Arms AC
Measurement Range	0.1 to 1200A
Output	Two standard safety banana jacks (4mm)
Transformation Ratio	1000:1
Output Signal	1mVAC/A AC (1V @ 1000A)
Accuracy 50/60Hz	0.5% @ 1000A
Frequency Range	30Hz to 5kHz
Phase Shift at 50Hz	0.5° @ 1000A
Open Secondary Voltage	N/A
Load Impedance	1MΩ, 100kΩ min. with derating
Overload	1200A for 40 mn ON then 20 mn OFF
Dimensions (H x W x D)	4.37 x 8.50 x 1.77” (111 x 216 x 45 mm)
Weight	1.21 lb (550g)
Operating Temperature	14° to +122°F (-10° to +50°C)
Storage Temperature	-4° to +158°F (-20 to +70°C)
Operating Humidity	90% RH
Pollution Degree	2
Ingress Protection (IP)	IP40
EMC	EN 61326-1
Safety Compliance	EN/IEC 61010-1 600V CAT III, EN/IEC 61010-032