AEMC AC/DC Current Probe Model MR415 (Replaces Cat #1200.70 - Model MR410)

Update Terakhir

AC/DC Current Probe Model MR415 (Replaces Cat #1200.70 - Model MR410)

Negara Asal

AMERIKA

Pembelian minimum

1

Harga

Kategori

AEMC

Minta Penawaran

Sharing:

Deskripsi produk

AC/DC Current Probe Model MR415 (Replaces Cat #1200.70 - Model MR410)

The MR415 is a hall effect current probe with 1 range designed for DMM, Data loggers and Power Analyzers. The probe has a 5 ft (1.5m) lead terminated by 4mm safety banana plugs and can measures up to 400AAC and 600ADC. The probe is powered by a 9V battery or by a standard 5V external power supply via a micro-USB connector (not supplied).

The instrument's design includes internal temperature compensation.

Specifications:

Maximum Conductor Size	Cables: One 1.18” (30mm) or two .94” (24mm) Bus Bar: One 1.97 x .39” (50 x 10mm) or two 1.23 x .39” (31.5 x 10mm) or three 0.98” x 0.31” (25 x 8mm)
Current Range	0.5 to 400A_AC, 600A_DC
Output Signal	1mV/A via a 5ft (1.5m) lead with 4 mm safety banana plug
Accuracy 50/60Hz	≤2% @ 400A
Frequency Range	DC to 30kHz (-3dB) (depending of current value)
Phase Shift At 50Hz	≤1.5°@ 400A
Load Impedance	>1MΩ and ≤100pF
Overload	3000A_DC or 1000A_AC continuous for < 1kHz
Zero Adjust	Automatic on both ranges
Power Supply	9V alkaline Battery (NEDA 1060A, 6LR61) or 5V DC Micro-USB type B
Battery Life	50H typical
Low Battery Indication	Green LED blinking
Overload Indication	Red LED on when measurement > than selected range
Dimensions (H x W x D)	8.82 x 3.82 x 1.73” (224 x 97 x 44mm)
Weight (with Battery)	0.98lbs (440g)
Operating Temperature	14° to +131°F (-10 to +55°C)
Storage Temperature	-40° to +176°F (-40 to +80°C)
Relative Humidity	Up to 85% @ 35°C
Ingress Protection (Ip)	IP 40
EMC	EN 61326-1
Safety Compliance	IEC 61010-1, EN 61010-2-32, Pollution Degree 2, 600V CAT III