021 -2216 3350

AEMC Voltage Absence Tester Model CA 771

Update Terakhir
Voltage Absence Tester Model CA 771
Negara Asal
Pembelian minimum
Minta Penawaran

Deskripsi produk

Voltage Absence Tester Model CA 771

An essential tool for electricians to ensure that voltage is not present before working on any electrical equipment or installation connected to the electrical system. Compliant with IEC 61243-3 Edition 2, the C.A 771 VAT can be used to work on any 1000V CAT IV installation. To meet the requirements of the standards in certain countries, these testers are available in two versions: equipped with IP2X test probes or without. The C.A 771 has a redundant safety system in the event of power supply faults; the ELV LED flashes when the voltage exceeds 50VAC / 120VDC.

Safety is ensured when testing GFCI and Residual Current Device (RCD) tripping by means of a double control system. Both hands are necessary to press the two buttons simultaneously. The integrated autotest checks the electrical circuits, power supply, displays and the condition of the measurement leads. Phase rotation measurement is simple and quick with the 2-wire microprocessor system. Audible and visual continuity testing is provided in compliance with Appendix B of the IEC 61243-3 standard. The tester can also detect stray voltages and offers unipolar phase identification.

Voltage Absence Testing (VAT)
  Voltage Indication - LEDs 12 to 1000Vac ; 12 to 1400Vdc
  Frequency Range DC, 16.67 to 800Hz
  Input Impedance >500kΩ
  Max. Peak Current 3.5mA RMS
  Polarity Indication Yes
  Redundant Hazardous
Voltage Indication
The ELV (Extra-Low Voltage) LED indicates that the voltage is higher than the SELV (Safety Extra-Low Voltage) with the rate at which it flashes proportional to the voltage level.
  Stray Voltage Detection Yes (by low-impedance load switching)
RCD Tripping Yes (by low-impedance load switching)
Phase/Neutral Identification >50V (45 to 65HZ) ; >150V (16.67 to 45Hz)
Continuity & Resistance
  Buzzer Trigger Threshold 100Ω typical (150Ω max.)
  Extended Continuity Test (resistance) 2kΩ, 60kΩ, 300kΩ
  Test Current / Open-circuit Voltage ≤ 1mA / ≤ 3.3V
Phase Rotation 2-wire method with microprocessor
  Ph/Ph Voltage 50 to 1000Vac (45 to 400Hz)
Buzzer Intermittent beep for Voltage Detection,
Continuous beep for Continuity
Cable Length 3.3ft (1m)
Display LEDs
Power Supply 2 x AA (LR6) Batteries (included)
Battery Life 5000 ten second measurements approximately
Dimensions 9.0 x 2.4 x 1.5” (228 x 60 x 39mm)
Weight (With Battery) 12.4oz (350g) approximately
Operating Temperature/Humidity -22 to 140˚F (-30 to +60˚C) / 20 to 95% RH non-condensing
Storage Temperature/Humidity -40 to 158˚F  (-40 to +70˚C) / 20 to 95% RH non-condensing
IP Rating IP 65
Electrical Safety 1000V CAT IV per IEC 61010-1


Perum Griya Indah Serpong Blok F6 No.8, Gn. Sindur, Kec. Gn. Sindur, Bogor,

Jawa Barat 16340, Indonesia

Phone                  :+62 -21-2216-3350  & +62-21- 292531-86

Whatsapp          : +62 812-8202-721 & +62 811-1871-501

Email                   : info@bapj.co.id || bopana.argaprima@gmail.com

Website              : www.bapj.co.id

Produk Terkait

                                                                                      PT. Bopana Arga Prima Jaya


Jl. Jupiter VI, Perum Bintang Metropol Blok A7 No.16 Bekasi Utara 17122 , Bekasi
Bekasi , Indonesia

021 -2216 3350
× How can I help you?