| DC | ||
| Measuring range | Resolution | Accuracy |
| 4V DC | 1 mV | ± (1.2% of measured value + 2 digits) |
| 40V DC | 10 mV | ± (1.5% of measured value + 2 digits) |
| 400V DC | 100 mV | ± (1.5% of measured value + 2 digits) |
| 600V DC | 1V | ± (2% of measured value + 2 digits) |
| Input impedance | 10 MΩ | |
| Overvoltage protection | 600V DC | |
| 600V AC RMS | ||
| AC | ||
| Measuring range | Resolution | Accuracy |
| 4V AC | 1 mV | ± (1.5% of measured value + 5 digits) |
| 40V AC | 10 mV | ± (1.5% of measured value + 2 digits) |
| 400V AC | 100 mV | ± (1.5% of measured value + 2 digits) |
| 600V AC | 1V | ± (2% of measured value + 2 digits) |
| Input impedance | 10 MΩ | |
| Overvoltage protection | 600V DC | |
| 600V AC RMS | ||
| Frequency range | 50 ... 400 Hz | |
| Alternating current | ||
| Measuring range | Resolution | Accuracy |
| 200 A AC | 100-mA | ± (3.0% of measured value + 5 digits) |
| Overload protection | 200 A AC | |
| Frequency range | 50 ... 60 Hz | |
| Resistance | ||
| Measuring range | Resolution | Accuracy |
| 400 Ω | 0.1 Ω | ± (1% of measured value + 4 digits) |
| 4 kΩ | 1 Ω | ± (1.5% of measured value + 4 digits) |
| 40 kΩ | 10 Ω | ± (1.5% of measured value + 4 digits) |
| 400 kΩ | 100 Ω | ± (1.5% of measured value + 4 digits) |
| 4 MΩ | 1 kΩ | ± (2.5% of measured value + 4 digits) |
| 40 MΩ | 10 kΩ | ± (3.5% of measured value + 4 digits) |
| Overvoltage protection | 250V DC | |
| 250 AC RMS | ||
| Connection thermocouple | Type K connection with adapter | |
| Capacity | ||
| Measuring range | Resolution | Accuracy |
| 4 nF | 0.1 nF | ± (5% of measured value + 20 digits) |
| 40 nF | 1 nF | ± (3% of measured value + 5 digits) |
| 400 nF | 10 nF | ± (3% of measured value + 5 digits) |
| 4 μF | 100 nF | ± (3% of measured value + 5 digits) |
| 40 μF | 1 μF | ± (3% of measured value + 5 digits) |
| 100 μF | 10 μF | ± (3% of measured value + 10 digits) |
| Overvoltage protection | 250V DC | |
| 250 AC RMS | ||
| Check feature | Test | Display |
| Diode test | Test current: 0.5-mA Reverse Voltage: 1.5V |
Forward voltage of the diode |
| Continuity test | Open circuit Voltage 0.5V | Noise when resistance <50 Ω |
| Overvoltage protection | 250V DC 250 AC RMS |
|
| General technical specifications | ||
| Jaw Capacity | About 17 mm / .7 in | |
| Display | 4000 digit LCD with backlight | |
| Continuity test | Noise when resistance <50 Ω | |
| Test current | About 0.5-mA | |
| Open circuit voltage | < 2V DC | |
| Battery indicator | Battery icon when battery voltage low | |
| Display overrange | OL appears in the display | |
| Refresh rate display | 3 Hz | |
| Temperature sensor | Thermocouple type K | |
| Input impedance | 10 MΩ | |
| Operating conditions | 5 ... 40°C / 41 ... 104°F, 80% rh non-condensing | |
| Storage conditions | -20 ... 60°C / -4 ... 140°F, 80% rh non-condensing | |
| Operating altitude | < 2000 m / 6561 ft | |
| Power supply | 2 x 1.5V AAA battery | |
| Automatic shutdown | 30 minutes | |
| Security conditions | IEC1010-1 (2001) CAT II 1000V CAT III 600V |
|
| Pollution degree | 2 | |
1 x Clamp meter PCE-CM 3
2 x Test leads
2 x Measuring tip
1 x Adapter thermocouple
1 x Thermocouple type K
2 x AAA batteries 1.5V
1 x User manual
1 x ISO Calibration Certificate
N.B. Calibration certificates are issued specifically for the customer and are excluded from the right of return.
