Simply Connect to a Tester or Recorder to Easily Measure Large Currents
Hioki current sensors are best-in-class devices for accurately capturing a wide range of current levels. The 9018-50 is a multi-range 500 A AC voltage output clamp sensor with superior phase characteristics for capturing waveforms with DMMs and Memory HiCorders. Measure AC current on live power lines without needing to cut the wire.
| 9018-50 | Wide band, BNC output terminal |
|---|
Motor power-on inrush current waveforms can be precisely recorded. The Clamp On Probe the 9018-50 is available for current measurement, as is the Clamp On Leak HiTester CM4003.
| Rated current | 10 A to 500 A AC, 6 ranges | |||||
|---|---|---|---|---|---|---|
| Accuracy | ±1.5% rdg. ±0.1% f.s. (45 to 66 Hz) | |||||
| Frequency characteristics | Add to amplitude accuracy : ± 1% rdg. Add to phase accuracy : ± 2.5° for frequencies from 40 Hz to 3 kHz |
|||||
| Output rate | 0.2 V AC f.s. (f.s. = setting rage) (Connect to a voltage input device providing a high input impedance of 1 MΩ) |
|||||
| Max. allowable input | 150 A rms continuous (10/20/50 A ranges) 400 A rms continuous (100/200 A ranges) 650 A rms continuous (500 A range) (For 40 Hz to 100 Hz: 100 %, and for 100 Hz to 1 kHz: within 50 % of derating) |
|||||
| Max. rated voltage to earth | 600 V rms (50 Hz/60 Hz, CAT III) | |||||
| Core diameter | φ46 mm (1.81 in) | |||||
| Dimensions and mass | 78 mm (3.07 in) W × 188 mm (7.40 in) H × 35 mm (1.38 in) D, 420 g (14.8 oz), cord length: 3 m (9.84 ft) | |||||
| Included accessories | Instruction manual ×1 | |||||
