For manual sample delivery via syringe, we offer two different density meter sets: For low sample volumes and high viscosity samples, we recommend Set 1 and for highly viscous and aggressive samples Set 2.
While the sample is added, you can check for air bubbles by looking through the inspection glass. A suitable medium is injected for the cleaning until all sample residues have been dissolved and removed.
The drying unit will then remove all liquid residues.
| DS7700 | DS7800 | |
|---|---|---|
| MEASUREMENT DATA | ||
| SCALES | Density [g/cm³] Relative Density Brix [%Brix] Concentration of alcohol [vol%] Concentration of sulphuric acid [wt%] User-defined |
|
| MEASUREMENT RANGE | 0–3 g/cm³ | |
| MEASUREMENT ACCURACY | ±0.001 g/cm³ | ±0.0001 g/cm³ |
| MEASUREMENT PERIOD | Typically: 1–3 minutes including temperature control | |
| SAMPLE VOLUME IN CASE OF MANUAL INJECTION | 0.9 ml | |
| AMBIENT TEMPERATURE | 10–40 °C | |
| TEMPERATURE RANGE | 10–40 °C | |
| ACCURACY OF TEMPERATURE CONTROL | ±0.02 °C | |
| METHODS | A practically unlimited number of methods can be set | |
| ADJUSTMENT | Automatic (menu-driven), with dried air and distilled water | |
| CONTENT SET 1 | ||
| DS7700-1 DS7800-1 |
Drying unit with 2/2-way valve Tygon tube set for use with Luer syringe: Air tube, waste tube, tube connections Luer Luer nozzle Luer syringes PE waste container with lid |
|
| CONTENT SET 2 | ||
| DS7700-2 DS7800-2 |
Drying unit with 2/2-way valve Tygon tube set for use with Luer syringe: Air tube, waste tube, tube connections Luer PTFE tube set for use with Luer syringe: Drain tube, waste tube, PEEK hollow screws PTFE splash guard Adaptor Olive/UNFa for sample discharge through Tygon tube via UNF nozzle Luer, UNF nozzle Luer syringes PE waste container with lid |
|
‘
‘
‘
Hubungi:
PT Bopana Arga Prima Jaya
Jalan Jupiter VI Perum Bintang Metropol
Blok A7 No.16 Bekasi Utara 17122
Jawa Barat, Indonesia
Telp : 021-22163350
Hp : 08119762505 / 081285345374
Email : boney@bapj.co.id / tesa@bapj.co.id
