Honeywell BW™ IntelliDoX System
Product Features
Enables bump test tracking, email notices and easy recordkeeping for improved compliance
Performs the quickest bump test in the industry for increased uptime and no wasted calibration gas
Enables the ability to change alarm set points, set a noncompliance indicator when a bump test is due, and adjust other parameters for maximum flexibility
The Honeywell BW™ IntelliDoX System combines smart docking modules and device management software to provide automated instrument management for Honeywell BW™ Solo, Honeywell BW™ Ultra, BW™ Max XT II, BW™ Clip Series, Honeywell BW™ Clip4 and Honeywell BW™ MicroClip Series gas detectors - helping you drive productivity, reliability and efficiency.
With the IntelliDoX instrument management system, simply place a detector in the docking module, and it automatically performs certain activities based on your specifications in the Fleet Manager II or Honeywell Safety Suite software. You can set each module to do a bump test, reconfigure the detector’s high and low alarm set points, and more. Also use the software to analyse the data from each gas detector, run reports, track compliance and even send email reminders to workers.
Thanks to IntelliDoX's unique design, each docking module has its LCD and keypad for independent operation. When multiple modules are ganged together, you can perform different activities for different detectors—all at the same time.
Features & Benefits:
▪ Enables bump test tracking, email notices and easy recordkeeping for improved compliance
▪ Performs the quickest bump test in the industry for increased uptime and no wasted calibration gas
▪ Enables the ability to change alarm set points, set a noncompliance indicator when a bump test is due, and adjust other parameters for maximum flexibility
Compatible with:
▪ Honeywell BW™ MicroClip Series – Multi-Gas Detector
▪ Honeywell BW™ Clip4 – Multi-Gas Detector
▪ Honeywell BW™ Ultra - Multi-Gas Detector
▪ Honeywell BW™ Max XT II – Multi-Gas Detector
▪ Honeywell BW™ Clip Series – Single Gas Detector
▪ Honeywell BW™ Solo – Single Gas Detector
Quick Spec:
▪ Easy setup with a network or USB drive — no tools required
▪ Expandable to five docking modules that can operate independently, while sharing power, network connection and calibration gas
▪ Easy data transfer — by Ethernet or USB — from docking module to computer
▪ Device management with Honeywell Safety Suite
| SIZE | 5.4 x 14.2 x 4.3 in (13.8 x 36.2 x 10.9 cm) (individual docking module) |
| WEIGHT | 4.2 lb (1.91 kg) |
| POWER SUPPLY | 12 V / 8.33A ITE Power Supply |
| REAL-TIME CLOCK | Provides time and date stamp |
| COMMUNICATIONS METHOD | Two-way infrared communication between docking module and detector |
| EXTERNAL INTERFACE | 1 USB port 1 Ethernet port |
| MENU NAVIGATION | Adjust display settings Adjust time and date Configure gas inlets Review IntelliDoX module Password protected (if enabled) Configure UI display language: English, French, German, Portuguese, Spanis |
| AUTOMATIC TESTS | Automatic bump test to verify sensor responds to target gas Automatic bump test in 10 seconds for BW Clip / BW Clip Real Time with FastBump |
| DATA STORAGE | 2 GB internal |
| PUMP | Independent pump in each IntelliDoX module Flow Rate: 350 ml/min |
| INSTRUMENT MANAGEMENT SYSTEM | Safety Suite Device Configurator or Fleet Manager II, version 4.5 or higher |
| RATINGS | EMC Directive 2014/30/EU Low Voltage Directive 2014/35/EU FCC Part 15 ICES-003 Canadian EMI IP20 |
| WARRANTY | Full two year warranty |
'
'
'
Catatan:
Harap Tanya stok sebelum melakukan pemesanan.
Barang akan dipacking dengan aman dan rapi.
Tidak ada complain yang diterima setelah transaksi selesai.
Tanpan video unboxing, komplain tidak akan diproses.
Terima kasih!
