(3)
The all-rounder for H2O pure type ASTM I + ASTM II
If both, pure and ultra pure water in small quantities is required, BOECOpure PLUS is the perfect system.
The ability to provide both types from a single system results from the combination of ultramodern purification technologies. These also make it possible to connect the system directly to a drinking water tap.
A press on the dispenser button activates dispensing of ultrapure water type ASTM I via the digital dispenser control. The recirculation of the pure water held in the installed 10 litre tank keeps it permanently at type ASTM II quality. The pure water tank has a second outlet for feeding downstream end users.
Features:
The BOECOpure PLUS UV is supplemented with UV-oxidation, 185/254 nm.
The BOECOpure PLUS UV/UF is supplemented with an ultrafilter and UV-oxidation, 185/254 nm.
ASTM Type I Ultrapure water applicable for Molecular biology, microbiology, PCR, inorganic and organic trace analysis HPLC, ICP, TOC-analysis
ASTM Type II pure water applicable for Rinsing laboratory glassware, preparing and diluting buffers, reagents, tissue culture media and dyes.
Sample preparation for analytical methods such as flame AAS
| Specification ASTM II: | Standard | UV | UV/UF |
| Pure water performance at 15°C: | 6l/h | 6 or 12 l/h | 6 l/h |
| Conductivity: | 0.067-0.1µS/cm | ||
| Resistance: | 15-10 MO x cm | ||
| Pure water tank pressurized outlet | yes | ||
| Specification ASTM I | Standard | UV | UV/UF |
| Conductivity: | 0.055 µS/cm | ||
| Resistance: | 18.2 MO x cm | ||
| Bacterial ** content: | 5-10 ppb | 1-5 ppb | 1-5 ppb |
| Dispensing performance: | up to 2 l/min | up to 2 l/min | up to 1.6 l/min |
| Bacterial ** content: | < 1 CFU/ml | ||
| Particles ** content: | < 1ml | ||
| Endotoxines* | 0.001 EU/ml | ||
| Feedwater requirements | |
| Drinking water acc. to DIN 2000 Feedwater temperature: | + 2°C up to + 35°C |
| Manganese and iron content: | < 0,05 mg/l |
| Free chlorine content: | < 1 mg/l |
| Silt density index (SDI): | max. 3 |
| Technical data | |
| Operating pressure in bar, min./max. | 0,5-6 bar |
| Supply voltage: | 100-240 V / 50-60 Hz |
| Connected load: | 0.1 kW |
| Connector size: | 8 mm hose |
| Ambient temperature: | + 2°C up to + 35°C |
| Dimensions ***, W x D x H: | 390 x 725 x 615 mm |
| Weight: | 20/21 kg |
* in dependence on the feedwater quality
** with sterilizing filter 0,2 µm
*** with OptiFill Dispenser
| Code | Description |
| BOE 8210051 | BOECOpure PLUS Standard, 6 l/h - Typical application: AAS, IC, ICP, buffers and media preparation |
| BOE 8210052 | BOECOpure PLUS UV, 6 l/h |
| BOE 8210102 | BOECOpure PLUS UV, 12 l/h Typical application: Ultra-trace analysis, ICP-MS, HPLC, TOC |
| BOE 8210053 | BOECOpure UF/UV Typical application: Life science and microbiology, cell culture media |
| BOECO Catalogue our entire assortment |
 |
 |
| Laboratory Equipment | |
|
| Water Purification | |
