Precise drying, heating, ageing, burn-in and hardening in research, science, industry and quality assurance.
Temperature
Working temperature range : |
at least 5 (UN/UNplus/UNm/UNmplus) or 10 (UF/UFplus/UFm/UFmplus) above ambient temperature to +300 °C |
Setting accuracy temperature : |
up to 99.9 °C: 0.1 / from 100 °C: 0.5 |
Setting temperature range : |
+20 to +300°C |
Temperature sensor : |
1 Pt100 sensor DIN class A in 4-wire-circuit |
Control technology
ControlCOCKPIT : |
SingleDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-colour display |
Timer : |
Digital backwards counter with target time setting, adjustable from 1 minute to 99 days |
Function SetpointWAIT : |
the process time does not start until the set temperature is reached |
Calibration : |
three freely selectable temperature values |
adjustable parameters : |
temperature (Celsius or Fahrenheit), air flap position, programme time, time zones, summertime/wintertime |
Ventilation
Convection : |
natural convection |
Fresh air : |
Admixture of pre-heated fresh air by electronically adjustable air flap |
Vent : |
vent connection with restrictor flap |
Communication
Documentation : |
programme stored in case of power failure |
Programming : |
AtmoCONTROL software for reading out, managing and organising the data logger via Ethernet interface (temporary trial version can be downloaded). USB stick with AtmoCONTROL software available as accessory (on demand). |
Safety
Temperature control : |
adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperature |
Autodiagnostic system : |
for fault analysis |
Standard equipment
Works calibration certificate : |
Calibration at +160°C |
Door : |
fully insulated stainless steel door with 2-point locking (compression door lock) |
Internals : |
1 stainless steel grid(s), electropolished |
Stainless steel interior
Interior : |
easy-to-clean interior,made of stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides |
Volume : |
32 l |
Dimensions : |
w(A) x h(B) x d(C): 400 x 320 x 250 mm |
Max. number of internals : |
3 |
Max. loading of chamber : |
60 kg |
Max. loading per internal : |
20 kg |
Textured stainless steel casing
Dimensions : |
w(D) x h(E) x d(F): 585 x 704 x 434 mm (d +56mm door handle) |
Housing : |
rear zinc-plated steel |
Electrical data
Voltage Electrical load : |
230 V, 50/60 Hz
approx. 1600 W |
Voltage Electrical load : |
115 V, 50/60 Hz
approx. 1600 W |
Ambient conditions
Set Up : |
The distance between the wall and the rear of the appliance must be at least 15 cm. The clearance from the ceiling must not be less than 20 cm and the side clearance from walls or nearby appliances must not be less than 5 cm. |
Altitude of installation : |
max. 2,000 m above sea level |
Ambient temperature : |
+5 °C to +40 °C |
Humidity rh : |
max. 80 %, non-condensing |
Overvoltage category : |
II |
Pollution degree : |
2 |
Packing/shipping data
Transport information : |
The appliances must be transported upright |
Customs tariff number : |
8419 8998 |
Country of origin : |
Federal Republic of Germany |
WEEE-Reg.-No. : |
DE 66812464 |
Dimensions approx incl. carton : |
w x h x d: 660 x 890 x 650 mm |
Net weight : |
approx. 45 kg |
Gross weight carton : |
approx. 61 kg |
Standard units are safety-approved and bear the test marks
CATEGORY PRODUK
Description Air Circulation Performance Class
UN30 Natural air circulation (Convection) SingleDISPLAY
Details
UF30 Forced air circulation (Fan) SingleDISPLAY
Details
UN55 Natural air circulation (Convection) SingleDISPLAY
Details
UF55 Forced air circulation (Fan) SingleDISPLAY
Details
UN75 Natural air circulation (Convection) SingleDISPLAY
Details
UF75 Forced air circulation (Fan) SingleDISPLAY
Details
UN110 Natural air circulation (Convection) SingleDISPLAY
Details
UN160 Natural air circulation (Convection) SingleDISPLAY
Details
UN260 Natural air circulation (Convection) SingleDISPLAY
Details
UN450 Natural air circulation (Convection) SingleDISPLAY
Details
UN750 Natural air circulation (Convection) SingleDISPLAY
Details
‘
‘
‘
Hubungi:
PT Bopana Arga Prima Jaya
Jalan Jupiter VI Perum Bintang Metropol
Blok A7 No.16 Bekasi Utara 17122
Jawa Barat, Indonesia
Telp : 021-22163350
Hp : 08119762505 / 081285345374
Email : boney@bapj.co.id / tesa@bapj.co.id