A BINDER material test chamber with mechanical convection of the FP series provides reliably short drying times and particularly fast heating – even for chambers under full loads.
+10°C above ambient temperature up to +300°C
Ethernet
| Designation | FP056-230V | FP056UL-120V |
| Article Number | 9010-0363 | 9010-0367 |
| Option model | Standard | Standard |
| Designation | FP056-230V | FP056UL-120V |
| Temperature range | +10 °C above ambient temperature to 300 °C | +10 °C above ambient temperature to 300 °C |
| Temperature uniformity at 150°C | 1.4 ± K | 1.4 ± K |
| Temperature fluctuation at 150°C | 0.4 ± K | 0.4 ± K |
| Heating up time to 150°C | 15 min | 15 min |
| Recovery time after door was opened for 30 s at 150°C | 4 min | 4 min |
| Designation | FP056-230V | FP056UL-120V |
| Air change rate at 100°C | 80 x/h | 80 x/h |
| Designation | FP056-230V | FP056UL-120V |
| Rated Voltage | 230 V | 120 V |
| Power frequency | 50/60 Hz | 60 Hz |
| Nominal power | 1,2 kW | 1,2 kW |
| Unit fuse | 10,0 A | 16,0 A |
| Phase (Nominal voltage) | 1~ | 1~ |
| Designation | FP056-230V | FP056UL-120V |
| Interior volume | 60 L | 60 L |
| Net weight of the unit (empty) | 41 kg | 41 kg |
| Load per rack | 30 kg | 30 kg |
| Permitted load | 70 kg | 70 kg |
| Wall clearance back | 160 mm | 160 mm |
| Wall clearance sidewise | 100 mm | 100 mm |
| Designation | FP056-230V | FP056UL-120V |
| Width net | 560 mm | 560 mm |
| Height net | 622 mm | 622 mm |
| Depth net | 596 mm | 596 mm |
| Designation | FP056-230V | FP056UL-120V |
| Interior width | 400 mm | 400 mm |
| Interior height | 440 mm | 440 mm |
| Interior depth | 342 mm | 342 mm |
| Unit doors | 1 | 1 |
| Designation | FP056-230V | FP056UL-120V |
| Sound-pressure level | 43 dB(A) | 43 dB(A) |
| Energy consumption at 100°C | 180 Wh/h | 180 Wh/h |
| Energy consumption at 150°C | 290 Wh/h | 290 Wh/h |
| Designation | FP056-230V | FP056UL-120V |
| Number of shelves (std./max.) | 2/4 | 2/4 |
|
Drying and heating chambers ED | ED-S | FD | FD-S | FED | FP | M series |
PDF, 2.21 MB |
|
Drying and heating chambers (FP series) - Drying chambers, constant climate chambers, dynamic climate chambers and cooling incubators test the service life of MinebeaMitsumi spindle motors MinebeaMitsumi Technology Center Europe GmbH |
PDF, 479.77 KB |
|
FP series |
PDF, 7.75 MB |
|
Data Sheet Model FP 56 |
PDF, 968.57 KB |
