No.1850-00 2-ch. Min-Max Digital Thermometer PC-3710

Update Terakhir

Negara Asal

JEPANG

Pembelian minimum

1

Harga

Nego

Kategori

Sharing:

Deskripsi produk

JAN code : 4974425801640

Calibration : Available

JCSS Accredited Calibration : Available

PC-3710 is a digital thermometer to monitor two locations at the same time, with an internal sensor and an external probe.

The 3-meter-long external probe detects down to −50°C, while the internal sensor measures down to −5°C.

Minimum and maximum temperatures can also be shown.

■ Two channels of temperatures

- Displays temperatures at the internal sensor (IN) and the external probe (OUT) simultaneously.

■ Maximum and minimum temperatures shown by simple key presses

■ IPX5 waterproof

- Safe to use in an environment with water splashes

■ Resolution 0.1°C

- Good for precise monitoring

■ Be hygienic

- Contains antimicrobial in the body.

- Sensor part in the external probe is made of hygienic stainless steel.

■ Three ways to install

■ How to check minimum (MIN) and maximum (MAX) temperatures

Short press of the key changes the view in the order of the current, MAX, MIN temperature, and goes back to the current temperature.

MIN and MAX is reset when either one of the following conditions is met:

- When the battery is replaced

- When the key is pressed for 3 seconds

Cat. No.		1850-00
Product name		2-ch. Min-Max Digital Thermometer
Model name		PC-3710
Measuring range	Internal sensor	−5.0 to 50.0°C
	External probe	−50.0 to 70.0°C
Accuracy		±1.0°C (0.0 to 40.0°C) ±2.0°C (other)
Resolution		0.1°C
Sampling time		10 seconds * Temperatures of internal sensor and external probe measured alternately every 5 seconds
Indicated items		Simultaneous display of temperatures at internal sensor and external probe
Waterproofness		IPX5 waterproof * Resists water only when the connector cap is closed, or the external probe is connected. * Do not put the probe underwater.
Operating ambient		−5 to 50°C, less than 80%rh without condensing
Power		AAA battery x1
Battery life		Approx. 2 years under room temperature, with alkaline battery
Material	Body	ABS resin with antimicrobial, silicone rubber
	External probe	Sensor part: SUS304, PE resin Cable: PVC resin (heat-resistant up to 50°C)
Dimensions	Body	67 (W) × 65 (H) ×22 (D) mm
	External probe	Sensor part: Ø5.5 × 11 mm (resin part Ø7.9 mm) Cable: 3 m long
Weight		71 g including battery
Accessories		AAA battery x1, clasp for holding external probe x1, instruction manua