| Wiring connections | 1P2W, 1P3W, 3P3W, 3P3W3A, 3P4W |
|---|---|
| Measurements | Voltage, Current, Frequency, Active power |
| Parameters | Apparent power, Reactive power, Active energy, Apparent energy, Reactive energy, Power factor (cos θ), Neutral current |
| Voltage range[RMS] | 150.0 / 300.0 / 600.0V |
| Voltage accuracy | ±0.2%rdg±0.2%f.s. (sine wave, 45 - 65Hz) |
| Current range[RMS] | 8128/8135 ( 50A type ) : 1.000 / 5.000 / 10.00 / 25.00 / 50.00A / auto 8127 ( 100A type ) : 2.000 / 10.00 / 20.00 / 50.00 / 100.0A / auto 8126 ( 200A type ) : 4.000 / 20.00 / 40.00 / 100.0 / 200.0A / auto 8125 ( 500A type ) : 10.00 / 50.00 / 100.0 / 250.0 / 500.0A / auto 8124/8130( 1000A type ) : 50.00 / 100.0 / 200.0 / 500.0 / 1000A / auto 8133 ( 3000A type ) : 60.00 / 300.0 / 600.0 / 1500 / 3000A / auto |
| Current accuracy | ±0.2%rdg±0.2%f.s. + Accuracy of Clamp sensor (sine wave, 45 - 65Hz) (*) +1%f.s. at the lowest range |
| Display range | 5 - 130% of each range(Voltage) 1 - 130% of each range(Current) |
| Crest factor | Voltage: up to 2.5, Current: up to 3.0 (with 90% fs or less) |
| Effect of power factor | Active power: ±1.0%rdg cos θ=±0.5 (PF=1) |
| Frequency meter range | 40.0 - 70.0Hz |
| Frequency meter accuracy | ±3dgt |
| Accuracy precondition | PF=1, Sine wave, 45 - 65Hz, 23ºC±5ºC |
| Display update period | 1 second |
| Applicable standards | IEC 61010-1 CAT III 600V |
| Operating temperature & humidity range | 0 - +50ºC, less than 85%RH (without condensation) |
| Storage temperature & humidity range | -20 - +60ºC, less than 85%RH (without condensation) |
| Power supply (AC Line) | AC100 - 240V±10% (50/60Hz) |
| Power supply (DC battery) | LR6 or Ni-MH (HR-15-51) ×6 (Battery charger not included), Battery life approx. 15h (LR6) |
| Power consumption | 10VA (max.) |
| Communication interface | USB, Bluetooth |
| PC card interface | SD card (2GB) |
| Dimensions | 175(L)×120(W)×65(D) mm |
| Weight | Approx. 800g (including batteries) |
| Included Accessories | 7141B (Voltage test lead set: 4pcs) 7148 (USB cable) 7170 (Power cord) 8326-02 (SD card 2GB) 9125 (Carrying case for KEW 6305, KEW 6305-01) 9135 (Carrying case for KEW 6305-03, KEW 6305-05) KEW Windows for KEW 6305 (PC Software) Battery (LR6)×6 Quick manual |
| Optional Accessories | 8124/8125/8126/8127/8128 (Load current Clamp Sensor) 8130/8133(*1)/8135(*2) (Flexible clamp sensor) 8312 (Power supply adaptor) 9132 (Magnetic carrying case) |
*1 Can be used with firmware version V1.10 or later for KEW 6305.
*2 The firmware version of KEW 6305 is V2.00 or later, and the serial number is "No.8369312" or later.
Please check here for the latest firmware.
*Included accessories for below models are same with above-mentioned.
