Teledyne Oldham Simtronics GD10P CO2 IR Point Gas Detector
The Teledyne GD10P-CO2 utilises advanced infrared gas measurement technology to deliver a rapid and dependable response. It has established itself as the benchmark for gas detection, excelling in safety, stability, and minimal maintenance. Backed by a 5-year warranty, the GD10P-CO2 is designed with features that effectively detect CO2 across a diverse range of industrial settings, from boiler plant rooms to offshore petrochemical installations.
Distinguishing itself from other point infrared gas detectors, the GD10P-CO2 employs silicon-based solid-state sources. Its optomechanical design ensures remarkable stability, allowing for an ultra-fast response speed and unparalleled service life, ultimately reducing maintenance and service expenses. We provide the longest combined warranty for the detector and IR source in the market, and the unit comes with worldwide hazardous area approvals, certified for use in SIL 2 systems.
Facilitated by an industry-standard HART® interface, the GD10P-CO2 allows for the configuration of special fault levels and access to extended maintenance data. Additional features and benefits include an integral termination compartment for swift installation, low power consumption reducing UPS load, and an independently heated mirror and lens for high-performance detection in challenging environmental conditions.
Technical Data
| General | |
|---|---|
| Detection method | Ir-absorption, dual wavelength, dual path |
| Ir-source | Solid state ir source, 50hz flash |
| Gases detected | Co2 |
| Self-test | Continuous |
| Calibration | Factory set, no field recalibration |
| Configuration | Hart (response time, fault levels) |
| Performance | |
| Accuracy | ±5% Fs between 0-50% reading ±7% Fs between 50-80% reading |
| Response time | Configurable T20 = 1 sec. (0.3 Sec) T50 = 2.5 Sec (0.7 Sec) T90 = 6 sec (1.6 Sec) |
| Output signal | Standard Current source 4 – 20 mA, max. Load Impedance 500 ohm Option Current sink 4 – 20 mA Hart® |
| Detector warnings | - Early clean optics - Dirty optics - Detector failure Configurable (HART) Pre warning (2 mA) Dirt accumulation (1 mA) Internal fault (0 mA) |
| Electrical | |
| Power supply | 24V dc, range (18 - 32v dc) |
| Power consumption | Approx. 3.5 W |
| Connection | 3 Wires (0.5mm2 - 2.5 mm2) |
| Cable entry | M20 exe cable gland |
| Temperature range | |
| Storage | -40°C to + 70°c (-40°f to +158°F) |
| Operating | -40°C to + 60°C (-40°F to +140°F) |
| Humidity (operation) | 100% RH |
| Explosion-proof housing | |
| Protection category | IP66/IP67 din 40050 |
| Housing material | Stainless steel sis2343 (astm316) |
| Weight | Approx. 2.9 Kg |
| Dimensions (lxwxh) | 251 X 1 04 x 1 05 (mm) 9.89 X 4.1 X 4.13 (Inches) |
| Warranty | |
| 5 Years full warranty on a complete instrument | |
| 15 Years warranty on the ir-sources | |
| Approvals | |
| ATEX / IECEX / INMETRO II 2G Ex de IIC T6 Gb | |
| CSA Ex de IIC T6 (Canada only) | |
| Class I, Division 2, Groups A, B, C, and D (USA and Canada) | |
| Other SIL2 (Software SIL3), ABS, MED | |
| Versions | |
| Standard ranges (volume) | 10000Ppm (1%) , 3%, 5%, 10% and 100% The 0-100% volume is also compensated for Methane interference. Other versions are available, please contact your dealer. |
| Front cover | |
| Required, select one | - Weather protection For standard point detector - Sample flow housing For sampling systems and testing - Duct mount kit For through wall installation |
| Accessories | |
| Mosquito net | Extra insect protection |
| Sun shade | Shielding for extreme radiation exposure |
'
'
'
Catatan:
Harap Tanya stok sebelum melakukan pemesanan.
Barang akan dipacking dengan aman dan rapi.
Tidak ada complain yang diterima setelah transaksi selesai.
Tanpan video unboxing, komplain tidak akan diproses.
Terima kasih!
